Grouting Machine

Product introduction 

Cement grouting machine with rich experience in the field of cement grouting, using R-WRT patented coating screw pump core technology at the same time, increase the power of three-phase motor group with stable performance, superior mechanical performance, reliability, better value, higher construction efficiency, so that grouting is more effective.

concrete buildings, railway tunnel, highway bridge and culvert slope, city subway, hydropower station, harbor engineering dam cracks, construction joints, joint grouting waterproof and anchor grouting, consolidation grouting and backfill grouting, curtain grouting and reinforcement of soft rock, soil, solid structure of honeycomb or grouting composite grouting engineering.

Operation guide

1 Before starting, adding a small amount of washing powder and water into the hopper, and then the movement of hose spiral mercury water hose and moist, after water is discharged from the outlet pipe by memory. Drainage should be clean, no residual water in the pipe.

2 The wind tube and the mortar tube tied up side by side. The air pipe is connected to the quick connector of the spray gun.

3 Turn on the power, not idle start, put a good mixing of materials in the hopper, press the forward button boot, screw pump starts to work. If the reverse, press the stop button to stop. Adjust the power supply and the beginning of the reverse, change the good steering, such as the direction of the inconvenience is not material.

4 Adjustable speed of the screw pump, the output flow of 0-8 L / min, in the work, such as the flow is too large, you can open the bucket under the shunt switch, the number of diversion can be adjusted, suitable for the construction requirements of the output speed can be

Brief form